Shimano XTR M9200 Disc Brake Pair Upgrade Kit 2026

SHIMANO XTR M9200 - Hydraulic Braking Kit (Upgrade Kit) - the pinnacle of MTB braking for Cross-Country and Trail: Precision, Lightness and Reliability.

This Shimano XTR M9200 brake kit represents the ultimate in Japanese engineering for XC (Cross-Country) and Trail riders. Designed for those who demand uncompromising performance, this Upgrade Kit allows you to radically transform your bike's handling. Whether you're a competitor looking to shave seconds off descents or an enthusiast wanting a consistent brake feel, the M9200 offers exceptional modulation. Thanks to its 2-piston calipers and ergonomic levers, you benefit from immediate braking power and optimal thermal management, even on the most demanding rides. The integration of J-Kit technology greatly facilitates assembly, especially for frames with internal cable routing.

Highlights of the Shimano XTR M9200 upgrade kit

• Increased braking power with reduced effort at the fingertips.
• Ultra-precise modulation for perfect control on technical and slippery terrain.
• Lightweight and rigid design optimized for pure performance.
• Reduced lever stroke for faster braking engagement.
• Optimized heat management thanks to titanium brake pad back plates.

BL-M9200 Master Cylinder Specifications

• Body material: Magnesium (for maximum weight savings)
• Lever material: Carbon fiber
• Lever size: 1 finger (optimized for XC)
• Mounting: I-Spec EV compatible clamp (wide adjustment range and increased rigidity)
• Reach Adjust: Tool-less or via key
• Contact point adjustment: Manual (Free Stroke)
• Technologies:
    - Free Stroke: Adjustment of the dead stroke for a personalized engagement
    - I-Spec EV: 60° rotation angle for the shifter and more rigidity thanks to the secondary support point on the handlebar
    - ServoWave Action: Short stroke for quick contact, then multiplied power for modulation
• Oil: Shimano LV low viscosity mineral oil
• Color: Series Gray XTR

BR-M9200 Caliper Specifications

• Body material: Aluminum
• Construction: Monoblock (machined from a single piece) for extreme rigidity
• Number of pistons: 2 pistons (ceramic to insulate from heat)
• Mounting: Postmount
• Technology:
    - One Way Bleeding: One-way bleeding to prevent air bubbles
    - Ice Technologies: Compatibility with finned pads and rotors (although this kit is delivered with non-finned pads)
• Oil: Shimano LV low viscosity mineral oil
• Pads: Metallic K04Ti-MX (titanium support) installed + Resin K05Ti-RX supplied
• Recommended Rotor: Shimano RT-MT900
• Color: Series Gray XTR

Hoses

• Model: SM-BH90-SS (High rigidity)
• Lengths: 100 cm (Front) and 170 cm (Rear)
• Connection: Straight / Straight

Box Contents

• 1x Complete front brake (BL-M9200 lever + BR-M9200 caliper + 1000 mm hose)
• 1x Complete rear brake (BL-M9200 lever + BR-M9200 caliper + 1700 mm hose)
• 2 pairs of K04Ti-MX metallic pads (installed, titanium support, no fin)
• 2 pairs of K05Ti-RX resin pads (spare)
• 1 bottle of Shimano 100 ml mineral oil (low viscosity SM-LVOIL)
• 2 connector inserts and olives for hose shortening

Product Reference

Reference: IBRM9200UPGKIT2 / EAN: 4550170997595

Important Information

• J-Kit System: The system is delivered "open" at the lever to facilitate internal hose routing in the frame. Bleeding is generally not necessary after connection if the operation is done carefully.
• Rotor Compatibility: For optimal performance, we recommend using Shimano RT-MT900 rotors.
• Adapters not included: Be sure to order the Postmount adapters corresponding to your frame and fork.

Shimano Weight: 312g (per complete brake, standard 800mm setup with 160mm rotor)