Sram Double Compression Hydraulic Brake Hose Kit - 2000mm - Black 2025

The SRAM Double Compression Hydraulic Hose Kit is the premium solution for maintaining and upgrading your SRAM and Avid brakes. Its unique "Double Compression" design allows for hose shortening at both ends (lever side and caliper side). For road and gravel bikes, this technology is a major asset as it allows for precise hose length adjustment without having to remove the bar tape.

With a generous length of 2000 mm, this kit is compatible with systems using DOT 4, DOT 5.1, or Maxima Mineral Oil.

SRAM Double Compression Kit highlights

• Bi-directional adjustment: Ability to cut the hose at the lever or the caliper for simplified installation.
• Wide compatibility: Suitable for a broad range of MTB models (Code, Level, Guide) and Road models (Red, Force, Apex).
• Ultra-complete kit: Includes all fittings, olives, barbs, and tools required for a successful bleed.
• Durable performance: High-pressure hose designed to maintain a firm and consistent brake feel.

Model compatibility (non-exhaustive list)

• MTB
    - Avid Code/R
    - Elixir 1/3
    - Juicy 3
    - DB 1/3/8
    - Level ULT/TLM (B1)
    - Level/T
    - Guide RE
    - G2 RE/RS/R
    - Maven Bronze
    - Code Stealth Bronze
• Road / Gravel
    - S900 2P (Red, Force, Rival eTap AXS)
    - APEX D1 (2023+)
    - Level 2P Stealth Ultimate & Silver

Technical specifications

• Manufacturer Part Number: 00.5318.036.000
• Model ID: AC-HYD-DCMP-A1
• Length: 2000 mm
• Compatible Fluids: DOT 4, DOT 5.1 (DOT series) or Maxima Mineral Oil (DB8 models)
• Colour: Black

Manufacturer Safety Warning: Although this hose kit is compatible with DOT (4 or 5.1) and Maxima Mineral Oil, it is strictly forbidden to mix these fluids. Once a type of fluid has been injected into the hose, it must never be contaminated by the other. Mixing DOT fluid and mineral oil causes swelling of the internal layer of the hose, restricting fluid movement and potentially leading to a total loss of braking, serious injury, or death. Only use the fluid for which your braking system was designed.

Kit contents

• 1 Specific hydraulic hose (2000 mm) and necessary seals
• 2 Short compression nuts (Road)
• 2 Long compression nuts (MTB)
• 2 SRAM Barbs
• 2 SRAM Olives
• 1 Protection cap (Boot)
• 2 External cable holders
• 2 Stem-mounted cable holders
• 1 T8 Torx key (Specific tool included for precise installation of the barbs into the hose)