The Muc-Off Tubeless Rim tape is made from their own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches in a 50m roll it's available in 5 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.
Features
Tubeless Tape to seal the spoke holes
50 m for up to 20 wheels of 29"
Various width available depending on the internal width of your rim - 17 mm - 21 mm - 25 mm - 28 mm - 30 mm
Tubeless valve not included
Installation : Clean the rim thoroughly with degreaser and start applying the tape opposite the valve. Begin by pressing down a short section (about 50-70mm) so it's stuck firmly across the rim. Then hold the wheel between your feet and apply about 25cm of tape at a time. Pull the tape as tightly as you can while pressing it down onto the rim. The tape should go on in a smooth manner, with no bubbles or wrinkles. You might need to use a side-to-side waggling motion to get the tape to form to the rim properly. Always maintain very high tension on the tape - literally as hard as you can pull. Overlap the ends of the tape about 70-100mm and cut with scissors. Cut a small hole in the tape for the valve and make it exactly the size of the rim, either by trimming with a very sharp scalpel or using light downward strokes of a small round file. Press down the tape to make sure it's well stuck down all the way round, including around the sidewall area.
Aucun avis pour le moment